Select Lever: Disassembly

WARNING: This page is about a different car, the 2003 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the packing.
Remove the grip.
Remove the indicator light, and then remove the indicator cover.
NOTE: Be careful not to break the indicator light during removal.

Fig 1: Removing Indicator Light & Indicator Cover
Courtesy of SUBARU OF AMERICA, INC.
Remove the slider.
Remove the cover.

Fig 2: Removing Cover
Courtesy of SUBARU OF AMERICA, INC.
Remove the clips, and then remove the guide plate.

Fig 3: Removing Clips & Guide Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the clamp and shift lock solenoid.

Fig 4: Removing Clamp & Shift Lock Solenoid
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolt.

Fig 5: Removing Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove the lock plate A, B, bushing and spacer.

Fig 6: Removing Lock Plate A, B, Bushing & Spacer
Courtesy of SUBARU OF AMERICA, INC.
Remove the cushion plate.

Fig 7: Removing Cushion Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the clip, and then remove the "P" position switch.

Fig 8: Removing Clip & Position Switch
Courtesy of SUBARU OF AMERICA, INC.
Remove the grommet, and then extract spring pin.

Fig 9: Removing Grommet & Extracting Spring Pin
Courtesy of SUBARU OF AMERICA, INC.
Remove the select lever lower, and then take away the select lever COMPL from plate.

Fig 10: Removing Select Lever Lower
Courtesy of SUBARU OF AMERICA, INC.
Remove the spring, and then remove the detent arm.

Fig 11: Removing Spring & Detent Arm
Courtesy of SUBARU OF AMERICA, INC.
Remove the bushing.

Fig 12: Removing Bushing
Courtesy of SUBARU OF AMERICA, INC.
Remove the plate.

Fig 13: Removing Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the bushing.

Fig 14: Removing Bushing

Courtesy of SUBARU OF AMERICA, INC.