Description & Operation: Notes
WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Vehicles are equipped with air bag supplemental restraint system. DO NOT apply electrical power to any component on steering column without first deactivating air bag system, or air bag may deploy. Before attempting any repairs involving steering column, instrument panel or related components, see AIR BAG SAFETY PRECAUTIONS and DISABLING & ACTIVATING AIR BAG SYSTEM in AIR BAG RESTRAINT SYSTEMS
article.
CAUTION:
Before disassembling or reassembling parts, always disconnect battery ground cable. When repairing radio, control module, etc., which are provided with memory functions, record memory contents before disconnecting battery ground cable. Otherwise, these contents are cancelled upon disconnection. Reassemble parts in reverse order of disassembly procedure unless otherwise indicated. Adjust parts to specifications contained in this manual if so designated. Connect connectors and hoses securely during reassembly. After reassembly, ensure functional parts operate smoothly. Airbag system wiring harness is routed near the electrical parts and switch. All airbag system wiring harness and connectors are colored yellow. Do not use electrical test equipment on these circuits. Be careful not to damage airbag system wiring harness when servicing the ignition key cylinder.