To Program Transmitters
WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Open driver's door.
- Close driver's door.
- Press and release any transmitter button that you wish to program into the system. Horn will chirp twice to indicate that the transmitter has been programmed.
NOTE:
You must finish the next step (opening the driver's door) within 45 seconds of starting the PROGRAMMING procedure.
NOTE:
Any additional transmitters may also be programmed at this time. Repeat the above steps for each additional transmitter.