Security Control Module (Impact Sensitivity)
WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before adjustment, ensure security control module has been securely installed on the bracket.
Remove security control module. See SECURITY CONTROL MODULE under REMOVAL & INSTALLATION. Adjust the sensitivity adjusting screw in the security control module. Turn clockwise for maximum sensitivity or counterclockwise for minimum sensitivity. See Fig 1 . Be sure to plug adjusting screw hole. Install security control module. Perform impact sensitivity test. See SECURITY CONTROL MODULE under COMPONENT TESTS.