Pressure Sensor: Installation

WARNING: This page is about a different car, the 2003 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

Tightening torque:

1.6 N.m (0.16 kgf-m, 1.2 ft-lb)

Fig 1: Locating Screws For Tightening

Courtesy of SUBARU OF AMERICA, INC.

NOTE: Replace the O-ring with a new one.

Fig 2: Replacing O-Ring With New One

Courtesy of SUBARU OF AMERICA, INC.