LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2002 >> Outback Base, 4D Sedan >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security & Locks >> Security Control Module >> Adjustment >> Impact Sensitivity
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Impact Sensitivity

NOTE: Before adjustment, make sure the security control module has been securely installed on the bracket.
  1. Remove security control module. Refer to REMOVAL  , Security Control Module.
  2. Adjust the sensitivity adjusting screw in security control module.
    NOTE: After adjusting, be sure to plug the adjusting screw hole.
    Fig 1: Adjusting Sensitivity Adjusting Screw In Security Control Module
    G02962138Courtesy of SUBARU OF AMERICA, INC.
  3. Install security control module.
  4. Perform impact sensitivity test.
scientia non olet · About LEMON Manuals