Section 9 (Clutch System): General Description: Specifications
WARNING: This page is about a different variant/trim than selected.
General Specifications Chart -- Clutch
| Clutch cover | Diaphragm set load kg (lb) | 580 (1,279) | |
| Clutch disc | Facing material | Woven | |
| O.D. x I.D. x thickness mm (in) | 225 x 150 x 3.5 (8.86 x 5.91 x 0.138) | ||
| Spline O.D. (No. of teeth) mm (in) | 25.2 (0.992) (24) | ||
| Depth of rivet head mm (in) | Limit of sinking | 0.3 (0.012) | |
| Limit for runout mm (in) | 1.0 (0.039) at R = 107 (4.21) | ||
| Clutch release lever ratio | 1.6 | ||
| Release bearing | Grease-packed self-aligning | ||
| Release lever | Stroke mm (in) | 12 - 13.6 (0.472 - 0.535) | |
| Clutch pedal | Full stroke mm (in) | 130 - 135 (5.12 - 5.31) | |
| Free play mm (in) | 4- 13 (0.16 - 0.51) | ||