LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2002 >> Outback L.L. Bean Edition >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Diagnostics) >> Subaru Select Monitor >> Operation >> Clear Memory Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clear Memory Mode

  1. On the << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
  2. On the << System Selection Menu >> display screen, select the {Transmission Control System} and press the [YES] key.
  3. Press the [YES] key after displayed the information of transmission type.
  4. On the << Transmission Diagnosis >> display screen, select the {Clear Memory} and press the [YES] key.
  5. When the 'Done' and Turn Ignition Switch OFF' are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the Subaru Select Monitor Operation Manual.
scientia non olet · About LEMON Manuals