MPT Model

WARNING: This page is about a different variant/trim than selected.

Remove the transmission assembly from the vehicle. << Ref. to REMOVAL , Automatic Transmission Assembly.>
Remove rear vehicle speed sensor, and separate the transmission case and extension case.
< Ref. to REMOVAL , Extension Case.>
Set the range select lever to "P".
Straighten the staked portion, and remove the lock nut.

Fig 1: Removing Lock Nut
Courtesy of SUBARU OF AMERICA, INC.
Using the ST1 and ST2, extract the reduction driven gear.
1. ST1 499737000 PULLER
2. ST2 899524100 PULLER SET

Fig 2: Extracting Reduction Driven Gear

Courtesy of SUBARU OF AMERICA, INC.