Rear Wheel Toe-In: Inspection
WARNING: This page is about a different car, the 2003 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Using a toe-in gauge, measure the rear wheel toe-in.
- Toe-in: 0+/-3 mm (0+/-0.12 in)
- Mark the rear sides of left and right tires at height corresponding to the center of spindles and measure distance "A" between marks.
- Move the vehicle forward so the that marks line up with front sides at height corresponding to the center of spindles.
- Measure the distance "B" between left and right marks. Toe-in can then be obtained by the following equation:
A - B = Toe-in