LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2003 >> Forester XS, Automatic >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> A/T & M/T Control Systems >> Select Cable >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Cable: Removal

  1. Set the vehicle on a lift.
  2. Disconnect the ground cable from battery.
  3. Prior to removal, set the lever to "N" position.
  4. Lift-up the vehicle.
  5. Remove the front and center exhaust pipe.

    Refer to REMOVAL , Front Exhaust Pipe.

  6. Remove the heat shield cover. (If equipped)
  7. Remove the snap pin from range select lever.
    Fig 1: Removing Snap Pin From Range Select Lever
    G02092929Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the plate assembly from transmission case.
    Fig 2: Removing Plate Assembly From Transmission Case
    G02092930Courtesy of SUBARU OF AMERICA, INC.
  9. Disconnect the cable from select lever, and then remove the cable bracket.
    Fig 3: Disconnecting Cable From Select Lever & Removing Cable Bracket
    G02092931Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the select cable from plate assembly.
scientia non olet · About LEMON Manuals