October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Select Cable: Installation
- Install select cable to plate assembly.
- Install select cable to range select lever.
- Install plate assembly to transmission. See Figure
.
- Install snap pin to range select lever. See Figure
.
- Insert the thread portion of the other inner cable and into connector hole of the select lever, and fix the other outer cable end to bracket.
- Move the select lever to the "N" position, then adjust the select cable position. See SELECT CABLE
under ADJUSTMENTS.
- Install heat shield cover.
- Install the front and center exhaust pipe. (Non-Turbo Model)
- Install the center exhaust pipe. (Turbo Model)