VDC Control Module (VDCCM): Removal

Disconnect ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove lower cover of instrument panel and disconnect connectors on the back side of the cover.

Fig 2: Removing Lower Cover Of Instrument Panel
Courtesy of SUBARU OF AMERICA, INC.
Remove three bolts which secure the fuse box onto body side, then move the fuse box aside.

Fig 3: Removing Bolts Which Secure Fuse Box Onto Body Side
Courtesy of SUBARU OF AMERICA, INC.
Remove two bolts which install VDCCM onto body side bracket.

Fig 4: Removing Bolts Which Install VDCCM Onto Body Side Bracket
Courtesy of SUBARU OF AMERICA, INC.
Disconnect connector from VDCCM by pulling up the securing holder.

Fig 5: Disconnecting Connector From VDCCM By Pulling Up Securing Holder
Courtesy of SUBARU OF AMERICA, INC.
Remove VDCCM.