Section 11 (Clutch System): General Description: Specifications
WARNING: This page is about a different variant/trim than selected.
General Specification
| Model | NON-TURBO | TURBO | |||
|---|---|---|---|---|---|
| Clutch cover | Type | Push type | Pull type | ||
| Diaphragm set load | kgf (lb) | 580 (1276) | 800 (1764) | ||
| Clutch disc | Facing material | Woven (Non asbestos) | |||
| O.D. x I.D. x thickness | mm (in) | Flywheel side | 225 x 150 x 3.5 (3.86 x 5.91 x 0.138) | 230 x 155 x 3.5 (9.06 x 6.10 x 0.138) | |
| Pressure plate side | 230 x 155 x 3.2 (9.06 x 6.10 x 0.126) | ||||
| Spline O.D. | mm (in) | 25.2 (0.992), (No. of teeth: 24) | |||
| Clutch release ever ratio | 1.6 | 1.7 | |||
| Release bearing | Grease-packed self-aligning | ||||
| Clutch pedal | Full stroke | mm (in) | 130 - 135 (5.12 - 5.31) | ||
| Free play | mm (in) | 4 - 13 (0.16 - 0.51) | 4 - 12 (0.16 - 0.47) | ||
| Clutch disc | Depth of rivet head : mm (in) | Standard | 1.65 - 2.25 (0.065 - 0.089) | 1.3 - 1.9 (0.051 - 0.075) | |
| Limit of sinking | 0.3 (0.012) | ||||
| Limit for deflection | mm (in) | 0.8 (0.031) at R = 107 (4.21) | 0.8 (0.031) at R = 110 (4.33) | ||
| I.D.: Inner diameter O.D.: Outer diameter |
|||||