Section 135 (Cooling System): General Description: Specifications
WARNING: This page is about a different car, the 2005 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
NON-TURBO AND TURBO MODEL SPECIFICATIONS
| Model | Non-turbo | Turbo | ||
|---|---|---|---|---|
| Cooling system | Electric fan + Forced engine coolant circulation system | |||
| Total engine coolant capacity | l (US qt, lmp qt) | AT: Approx. 6.8 (7.19, 5.98) MT: Approx. 6.9 (7.29, 6.07) |
AT: Approx. 7.3 (7.71, 6.42) MT: Approx. 7.4 (7.82, 6.51) |
|
| Water pump | Type | Centrifugal impeller type | ||
| Discharge performance I | Discharge | 20 l (5.3 US gal, 4.4 lmp gal)/min. | ||
| Pump speed - Discharge pressure | 760 RPM - 2.9 kPa (0.030 kgf/cm2 , 0.42 psi) | |||
| Engine coolant temperature | 85°C (185°F) | |||
| Discharge performance II | Discharge | 100 l (26.4 US gal, 22.0 lmp gal)/min. | ||
| Pump speed - Discharge pressure | 3,000 RPM - 49.0 kPa (0.50 kgf/cm2 , 7.1 psi) | |||
| Engine coolant temperature | 85°C (185°F) | |||
| Discharge performance III | Discharge | 200 l (52.8 US gal, 44.0 lmp gal)/min. | ||
| Pump speed - Discharge pressure | 6,000 RPM - 225 kPa (2.298 kgf/cm2 , 32.69 psi) | |||
| Engine coolant temperature | 85°C (185°F) | |||
| Impeller diameter | 76 mm (2.99 in) | |||
| Number of impeller vanes | 8 | |||
| Pump pulley diameter | 60 mm (2.36 in) | |||
| Clearance between impeller and case | Standard | 0.5 - 0.7 mm (0.020 - 0.028 in) | 0.5 - 1.5 mm (0.020 - 0.060 in) | |
| "Thrust" runout of impeller end | 0.5 mm (0.020 in) | - | ||
| Thermostat | Type | Wax pellet type | ||
| Starts to open | 76 - 80°C (169 - 176°F) | |||
| Fully opened | 91°C (196°F) | |||
| Valve lift | 9.0 mm (0.354 in) or more | |||
| Valve bore | 35 mm (1.38 in) | |||
| Radiator fan | Motor | Main fan | 120 W | |
| Sub fan | 120 W | |||
| Fan diameter x Blade | 320 mm (11.81 in) x 5 (main fan) 320 mm (11.81 in) x 7 (sub fan) |
|||
| Radiator | Type | Down flow, pressure type | ||
| Core dimensions | Width x Height x Thickness | 691.5 x 360 x 16 mm (27.22 x 14.17 x 0.63 in) | ||
| Pressure range in which cap valve is open | Above: 108+/-15 kPa (1.1+/-0.15 kgf/cm2
, 16+/-2 psi) Below: -1.0 to -4.9 kPa (-0.01 to -0.05 kgf/cm2 -0.1 to -0.7 psi) |
|||
| Fins | Corrugated fin type | |||
| Reservoir tank | Capacity | 0.5 l (0.5 US qt, 0.4 lmp qt) | ||