LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2004 >> Forester XT, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (Security And Locks) >> Ignition Key Lock >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Key Lock: Inspection

WARNING: This page is about a different car, the 2005 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel lower cover.
  2. Remove the lower column cover.
  3. Unfasten the hold down clip which secures harness and disconnect the connector of ignition switch from body harness.
  4. Turn the ignition key plate to each position and check the continuity between terminals of ignition connector.
SWITCH POSITION

Switch position Terminal No. Standard
LOCK - -
ACC No. 1 and No. 2 Less than 1 ohm
ON No. 1 and No. 2
No. 1 and No. 4
No. 2 and No. 4		 Less than 1 ohm
ST No. 1 and No. 3
No. 1 and No. 4
No. 3 and No. 4		 Less than 1 ohm

If NG, replace the ignition switch.

scientia non olet · About LEMON Manuals