Body Integrated Unit
WARNING: This page is about a different car, the 2005 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
BODY INTEGRATED UNIT TERMINALS SPECIFICATION
| Content | Terminal No. | Measuring condition |
|---|---|---|
| Door switch (Except driver's door) | b7 (INPUT) | 0 V is present when any door is open (Except driver's door). |
| Door switch (Driver's door) | b8 (INPUT) | 0 V is present when driver's door is open. |
| Door lock switch | b11 (INPUT) | 0 V is present when the door lock switch is turned to UNLOCK. |
| Door lock switch | b12 (INPUT) | 0 V is present when the door lock switch is turned to LOCK. |
| Keyless entry control unit (LOCK) | b13 (INPUT) | Battery voltage is present when the transmitter LOCK/ARM button is pressed. |
| Keyless entry control unit (UNLOCK) | b14 (INPUT) | Battery voltage is present when the transmitter UNLOCK/DISARM button is pressed. |
| Ignition switch (ON) | b19 (INPUT) | Battery voltage is present when ignition switch is turned to ON. |
| Key warning switch | b20 (INPUT) | Battery voltage is present when the key is inserted into ignition switch. |
| Power supply | a2 | Battery voltage is constantly present. |
| Ground | a4 | 0 V is constantly present. |
| Room light | a5 (OUTPUT) | 0 V is present when the transmitter UNLOCK/DISARM button is pressed. |
| Door and rear gate lock actuator | a6 (OUTPUT) | Battery voltage is present when the transmitter LOCK/ARM button is pressed. |
| Door and rear gate lock actuator (Except driver side) | a7 (OUTPUT) | Battery voltage is present when the transmitter UNLOCK/DISARM button is pressed two times. |
| Door lock actuator (Driver side) | a8 (OUTPUT) | Battery voltage is present when the transmitter UNLOCK/DISARM button is pressed one time. |
| Ground | a13 | 0 V is constantly present. |