LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2004 >> Forester XT, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (Security And Locks) >> Keyless Entry System >> Inspection >> Check Buzzer Chirp Setting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Buzzer Chirp Setting

WARNING: This page is about a different car, the 2005 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CHECKING BUZZER CHIRP SETTING

Step Check Yes No
1 : CHECK BUZZER CHIRP SETTING. 
  1. Check the current setting of the buzzer chirp.
  2. Remove the key from the ignition switch.
  3. Close all doors and the rear gate.
  4. Press the LOCK/ARM or UNLOCK/DISARM button.
 Does the buzzer signal chirp? Buzzer chirp function is OK. Go to step 2. 
2 : CHECK BUZZER CHIRP SETTING. 
  1. Press the UNLOCK/DISARM button once.
  2. Press both the LOCK/ARM and UNLOCK/ DISARM buttons for more than 2 seconds.
  3. Press the LOCK/ARM or UNLOCK/DISARM button.
 Does the buzzer signal chirp? Buzzer chirp function is OK. Check the transmitter function. < Ref. to CHECK TRANSMITTER BATTERY AND FUNCTION , Inspection, Keyless Entry System. >
scientia non olet · About LEMON Manuals