Impact Sensitivity

WARNING: This page is about a different car, the 2005 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before adjustment, make sure the security control unit has been securely installed on the bracket.

Remove the security control unit. < Ref. to REMOVAL , Security Control Unit. >
Adjust the sensitivity adjust screw in the security control unit.
NOTE: After adjusting, be sure to plug the adjust screw hole.

Fig 1: Plugging The Adjust Screw Hole
Courtesy of SUBARU OF AMERICA, INC.
Install the security control unit.
Perform the impact sensitivity test.