LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2004 >> Outback Base, 4D Sedan >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake Control System - Vehicle Dynamics Control (VDC) >> VDC Sequence Control >> Operation >> VDC Sequence Control With Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VDC Sequence Control With Select Monitor

NOTE:
  • In the event of any trouble, the sequence control may not be operative. In such a case, activate the sequence control, referring to "VDC SEQUENCE CONTROL WITH DIAGNOSIS CONNECTOR". Refer to VDC SEQUENCE CONTROL .
  • When the diagnosis terminal is connected to the diagnosis connector, the sequence control will not operate.
  1. Connect select monitor to data link connector beside driver's seat instrument panel lower cover.
  2. Turn ignition switch ON.
  3. Turn select monitor switch ON.
  4. Put select monitor to "BRAKE CONTROL" mode.
  5. Select "VDC Check Mode" in {Function check sequence} menu to start `VDC sequence control'.
    CAUTION: Do not depress the clutch pedal. 
  6. When the message "Press YES" is displayed, press << YES >> key.
  7. Operation points will be displayed on select monitor.
scientia non olet · About LEMON Manuals