LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2004 >> Outback Base, 4D Sedan >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Fuel Injection (Fuel Systems) (H4SO U5 (PZEV))) >> Engine Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect battery ground cable.
    Fig 1: Disconnecting Battery Ground Cable
    G00852203Courtesy of SUBARU OF AMERICA, INC.
  2. Remove lower inner trim of passenger side. Refer to REMOVAL , Lower Inner Trim.
  3. Detach floor mat of passenger seat.
  4. Remove protect cover.
    Fig 2: Removing Lower Inner Trim Of Passenger Side
    G00852204Courtesy of SUBARU OF AMERICA, INC.
  5. Remove nuts (A) which hold ECM to bracket.
  6. Remove clip (B) from bracket.
    Fig 3: Removing Clip From Bracket
    G00852205Courtesy of SUBARU OF AMERICA, INC.
  7. Disconnect ECM connectors and take out ECM.