Timing Cover: Service and Repair

Belt Cover

REMOVAL
1. Remove V-belt.
2. Remove crankshaft pulley.
3. Remove belt cover (LH).





4. Remove front belt cover.

INSTALLATION
1. Install front belt cover.
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)





2. Install belt cover (LH).
Tightening torque: 5 Nm (0.5 kgf-m 3.6 ft. lbs.)
3. Install crankshaft pulley.
4. Install V-belt.

INSPECTION
Make sure the cover is not damaged.