Section 18 (Clutch System): General Description: Specifications
WARNING: This page is about a different variant/trim than selected.
Clutch System General Specifications Chart
| Item | Non-TURBO model | TURBO model | ||
|---|---|---|---|---|
| Clutch cover | Type | Push type | Pull type | |
| Diaphragm set load | kg (lb) | 580 (1276) | 800 (1764) | |
| Clutch disc | Facing material | Woven (Non asbestos) | Woven (Non asbestos) | |
| O.D. x I.D. x thickness mm (in) | Flywheel side | 225 x 150 x 3.5 (8.86 x 5.91 x 0.138) | 230 x 155 x 3.5 (9.06 x 6.10 x 0.1) | |
| Pressure plate side | 230 x 155 x 3.2 (9.06 x 6.10 x 0.126) | |||
| Spline O.D. | mm (in) | 25.2 (0.992), (No. of teeth: 24) | 25.2 (0.992), (No. of teeth: 24) | |
| Clutch release lever ratio | 1.6 | 1.7 | ||
| Release bearing | Grease-packed self-aligning | Grease-packed self-aligning | ||
| Clutch pedal | Full stroke | mm (in) | 130 - 135 (5.12 - 5.31) | 130 - 135 (5.12 - 5.31) |
| Free play | mm (in) | 4 - 13 (0.16 - 0.51) | 4 - 13 (0.16 - 0.51) | |
| Clutch disc | Depth of rivet head mm (in) | Standard | 1.65 - 2.25 (0.065 - 0.089) | 1.3 - 1.9 (0.051 - 0.075) |
| Limit of sinking | 0.3 (0.012) | 0.3 (0.012) | ||
| Limit for deflection | mm (in) | 0.8 (0.031) at R = 107 (4.21) | 0.8 (0.031) at R = 110 (4.33) | |
| I.D.: Inner diameter O.D.: Outer diameter |
||||