SUBARU Select Monitor (OBD Mode)

On the << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
On the << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
Press the [YES] key after displayed the information of engine type.
On the << Engine Diagnosis >> display screen, select the {OBD System} and press the [YES] key.
On the << OBD Menu >> display screen, select the {Diagnosis Code(s) Display} and press the [YES] key.
Make sure that a diagnostic trouble code (DTC) is shown on the display screen.
NOTE:
- For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
- For detailed concerning diagnostic trouble codes, refer to the LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .
  < Ref. to , LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >