LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2005 >> Baja Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Lighting System) >> Back-up Light System >> Inspection >> Back-Up Light Relay (5AT Model)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Back-Up Light Relay (5AT Model)

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Measure the resistance between back-up light relay terminals when connecting terminal No. 4 to battery positive terminal and terminal No. 3 to battery ground terminal.

Fig 1: Measuring Resistance Between Back-Up Light Relay Terminals
G03833526Courtesy of SUBARU OF AMERICA, INC.
TERMINAL CURRENT SPECIFICATION

Current Terminal No. Standard
Flow 1 and 2 Less than 1
No flow More than 1 M
NOTE: Check other than back-up light relay. < Ref. to INSPECTION , Inhibitor Switch. >
scientia non olet · About LEMON Manuals