LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2005 >> Baja Base, Standard >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> A/T & M/T Control Systems >> A/T Shift Lock System >> Electrical Specification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electrical Specification

Fig 1: Identifying A/T Shift Lock System Connector Terminals
G03750240Courtesy of SUBARU OF AMERICA, INC.
ELECTRICAL SPECIFICATION

Contents To Connector No. Terminal No. Input/Output signal
Measured value and measuring conditions
Battery power supply B281 2 9 - 16 V
Ignition power supply B280 19 10 - 15 V when ignition switch is at ON or START.
ACC power supply B280 10 10 - 15 V when ignition switch is at ACC or ON.
Inhibitor Switch ("P" position) B280 5 0 V when select lever is in "P" position.
9 - 16 V when select lever is in other positions than "P" position.
Stop light switch B280 9 9 - 16 V when stop light switch is ON.
0 V when stop light switch is OFF.
"P" position switch B280 6 0 V when select lever is in "P" position.
9 - 16 V when select lever is in other positions than "P" position.
Shift lock solenoid signal B281 9 8.5 - 16 V when shift lock is released.
0 V when shift lock is operating.
Key warning switch signal B280 20 9 - 16 V when key is inserted.
0 V when key is removed.
Key lock solenoid signal B281 3 Pulse is output when switching key lock between locked and unlocked.
0 V at other conditions than above.
Ground B281 4 -
Ground B281 13 -
scientia non olet · About LEMON Manuals