Cruise Control Command Switch: Inspection
Measure the cruise control command switch resistance.
RESISTANCE SPECIFICATIONS
| Switch | Position | Terminal No. | Standard value |
|---|---|---|---|
| CANCEL | ON | 1 (+) and 2 (-) | Less than 1 ohm |
| ON | 1 (+) and 3 (-) Less than 1 ohm | ||
| SET/COAST | OFF | 1 and 3 | More than 1 Mohm |
| ON | 1 and 3 Less than 1 ohm | ||
| RESUME/ACCEL | OFF | 1 and 2 | More than 1 Mohm |
| ON | 1 and 2 Less than 1 ohm | ||
| MAIN SWITCH | OFF | 5 and 4 | More than 1 Mohm |
| ON | 5 and 4 Less than 1 Mohm |
If NG, replace the cruise control and switch.