RH Side
- Release the fuel pressure.
< Ref. to RELEASING OF FUEL PRESSURE, PROCEDURE , Fuel. >
- Open the fuel filler flap lid, and remove the fuel filler cap.
- Disconnect the ground cable from battery.
- Remove the air intake duct and air cleaner case.
< Ref. to REMOVAL , Air Intake Duct. >
< Ref. to REMOVAL , Air Cleaner Case. >
- Remove the power steering pump and tank from the brackets.
- Remove the front side V-belt. < Ref. to REMOVAL , V-Belt. >
- Remove the bolts which hold the power steering pipes onto the intake manifold protector.
- Remove the bolts which install the power steering pump to the bracket.
- Disconnect the connector from the power steering pump switch (A).
- Remove the reservoir tank from the bracket by pulling it upwards.
- Place the power steering pump and tank on the right side wheel apron.
- Remove the spark plug cords from spark plugs (#1 and #3 cylinders).
- Remove the fuel pipe protector RH.
- Disconnect the connector (A) from fuel injector.
- Remove the harness band (B) which holds engine harness to injector pipe.
- Remove the bolts which hold fuel injector pipe onto intake manifold.
- Remove the fuel injector while lifting up the fuel injector pipe.