Keyless Entry Control Unit
KEYLESS ENTRY CONTROL UNIT TERMINALS SPECIFICATION
| Content | Terminal No. | Measuring condition |
|---|---|---|
| Body integrated unit | 1 (OUTPUT) | Battery voltage is present when the transmitter LOCK/ARM button is pressed. |
| Body integrated unit | 2 (OUTPUT) | Battery voltage is present when the transmitter UNLOCK/DISARM button is pressed. |
| Security control unit | 3 | - |
| Security control unit | 4 | - |
| Door lock switch | 5 (INPUT) | 0 V is present when the door lock switch is turned to LOCK. |
| Ignition switch (ON) | 6 (INPUT) | Battery voltage is present when ignition switch is turned to ON. |
| Key warning switch | 7 (INPUT) | Battery voltage is present when the key is inserted into the ignition switch. |
| Door lock switch | 8 (INPUT) | 0 V is present when the door lock switch is turned to UNLOCK. |
| Rear gate latch switch | 9 (INPUT) | 0 V is present when rear gate is open. |
| Door switch | 10 (INPUT) | 0 V is present when any door is open. |
| Ground | 11 | 0 V is constantly present. |
| Turn signal light (Left) | 12 (OUTPUT) | Battery voltage is present when the transmitter UNLOCK/DISARM or LOCK/ARM button is pressed. |
| Horn relay | 13 (OUTPUT) | 0 V is present when the transmitter LOCK/ARM button is pressed three times within 5 seconds. |
| Power supply (Back-up) | 14 | Battery voltage is constantly present. |
| Power supply (Back-up) | 15 | Battery voltage is constantly present. |
| Keyless buzzer | 16 (OUTPUT) | 0 V is present when the transmitter UNLOCK/DISARM or LOCK/ARM button is pressed. |
| Security control unit | 17 | - |
| Turn signal light (Right) | 18 (OUTPUT) | Battery voltage is present when the transmitter UNLOCK/DISARM or LOCK/ARM button is pressed. |