LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2005 >> Forester XT, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Security And Locks >> Security Control Unit >> Procedure >> Enter Identification Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Enter Identification Mode

  1. Open the driver's door and leave it open.
    NOTE: Check if the battery cable is connected.
  2. Turn the ignition switch to ON two times. (LOCK --> ON --> LOCK --> ON --> LOCK)
  3. The indicator light will start blinking.
    IDENTIFICATION MODE

    Number of times blinked Vehicle state
    1 time Any door, rear gate or trunk lid has been opened.
    3 times The impact sensor in the system's unit has been activated. This may indicate that your vehicle has been shocked or tampered with by some outside force and/or unauthorized person.
    4 times The ignition switch has been turned on, or the battery has been disconnected.
  4. Close the door and turn the ignition switch to ON.
scientia non olet · About LEMON Manuals