LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2005 >> Forester XT, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake Control System - Vehicle Dynamics Control (VDC) >> VDC Control Module (VDCCM) >> Adjustment >> Without SUBARU Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Without SUBARU Select Monitor

  1. Park the vehicle in a straight ahead position on a horizontal surface.
  2. Confirm the steering wheel center position. (If the center position is not accurate, adjust wheel alignment.)
  3. Drive the vehicle approx. 10 km (6 MPH) preferably on a straight road, then turn the ignition switch OFF. Then drive the vehicle approx. 10 km (6 MPH) again confirming that ABS and VDC warning lights do not go ON while vehicle is being driven. Also make sure there are no failure of the VDC function (VDC operation and buzzer) or wandering.
    NOTE: If it is not possible to drive the vehicle, use Subaru Select Monitor. < Ref. to WITH SUBARU SELECT MONITOR , ADJUSTMENT, VDC Control Module (VDCCM). >
  4. If there are any malfunction found, conduct the procedure over again.
scientia non olet · About LEMON Manuals