Fuel Sub Level Sensor: Installation

Install in the reverse order of removal.

1. Ensure the sealing portion is free from fuel or foreign particles before installation.
2. Tighten the nuts and bolts to specified torque in the order as shown in Fig 1 .

   Tightening torque: 

   4.4 N.m (0.45 kgf-m, 3.2 ft-lb) 

   Fig 1: Tightening Bolts With Torque Specification (1 Of 2)

   Courtesy of SUBARU OF AMERICA, INC.
   Fig 2: Tightening Bolts With Torque Specification (2 Of 2)

   Courtesy of SUBARU OF AMERICA, INC.