Read Current Data
- On the << Main Menu>> display screen, select the {Each System Check} and press the [YES] key.
- On the << System Selection Menu>> display screen, select the {Brake Control} and press the [YES] key.
- Press the [YES] key after {VDC AWD AT} is displayed.
- On the << Brake Control Diagnosis>> display screen, select the {Current Data Display/Save}, and then press the [YES] key.
- On the << Data Display Menu>> display screen, select the display method, and press the [YES] key.
- Using a scroll key, scroll the display screen up or down until necessary data is shown.
- A list of the support data is shown in SUBARU MONITOR CONTENTS DISPLAY DETAILS .
SUBARU MONITOR CONTENTS DISPLAY DETAILS
| Display | Contents to be monitored | Unit of measure |
|---|---|---|
| FR Wheel Speed | Wheel speed detected by front ABS wheel speed sensor RH is displayed. | km/h or MPH |
| FL Wheel Speed | Wheel speed detected by front ABS wheel speed sensor LH is displayed. | km/h or MPH |
| RR Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor RH is displayed. | km/h or MPH |
| RL Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor LH is displayed. | km/h or MPH |
| Steering Angle Sensor | Steering angle detected by steering angle sensor is displayed. | deg |
| Yaw Rate Sensor | Vehicle angular speed detected by yaw rate sensor is displayed. | deg/s |
| Pressure Sensor | Brake fluid pressure detected by pressure sensor is displayed. | bar |
| Lateral G Sensor | Vehicle lateral acceleration detected by lateral G sensor is displayed. | m/s (m/s^2) |
| IG power supply voltage | Voltage supplied to VDCCM&H/U is displayed. | V |
| EMA signal | Engine control command signal is displayed. | 1 or 0 |
| TCS Operation Light | TCS operation condition is displayed. | ON or OFF |
| VDC Operation Light | VDC operation condition is displayed. | ON or OFF |
| VDC OFF Light | ON/OFF condition of VDC OFF indicator light is displayed. | ON or OFF |
| EBD Warning Light | ON operation of the EBD warning light is displayed. | ON or OFF |
| ABS Warning Light | ON operation of the ABS warning light is displayed. | ON or OFF |
| VDC Warning Light | ON operation of the VDC warning light is displayed. | ON or OFF |
| VDC OK-B signal | Malfunction of VDC sensor (except for vehicle speed sensor) is displayed. | 1 or 0 |
| Valve Relay Signal | Valve relay operation signal is displayed. | ON or OFF |
| Motor Relay Signal | Motor relay operation signal is displayed. | ON or OFF |
| Motor Relay Monitor | Motor relay monitor signal is displayed. | ON or OFF |
| PATA Signal | Operation condition of VDC OFF switch is displayed. | ON or OFF |
| BLS Signal | Brake ON/OFF is displayed. | ON or OFF |
| Gear position | Present gear position is displayed. | - |
| Engine Speed | Current engine speed is displayed. | rpm |
| PW Signal | Acceleration opening is displayed. | % |
NOTE:
For details concerning operation procedure, refer to " SUBARU SELECT MONITOR OPERATION MANUAL ".