A/T Shift Lock System: Inspection: Notes
WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
1 CHECK SHIFT LOCK.
|
While the brake pedal is depressed, can select lever move from "P" range to other positions? | Go to step 2. | Inspect < Ref. to , SELECT LEVER SHIFT LOCK CANNOT BE RELEASED , INSPECTION, A/T Shift Lock System. > |
| 2 CHECK SHIFT LOCK. | While the brake pedal is not depressed, can select lever move from "P" range to other positions? | Inspect < Ref. to , SELECT LEVER CANNOT BE SHIFT LOCKED , INSPECTION, A/T Shift Lock System. > | Go to step 3. |
| 3 CHECK KEY INTERLOCK. | When the select lever is in other than "P" position, does ignition switch turn to "LOCK" position? | Inspect < Ref. to , SELECT LEVER SHIFT LOCK CANNOT BE RELEASED , INSPECTION, A/T Shift Lock System. > | Go to step 4. |
| 4 CHECK KEY INTERLOCK. | When the select lever is in "P" position, does ignition switch turn to "LOCK" position? | A/T shift lock system is normal. | Inspect < Ref. to , SELECT LEVER SHIFT LOCK CANNOT BE RELEASED , INSPECTION, A/T Shift Lock System. > |