DTC C0045 Different VDC Control Module Specification
DTC DETECTING CONDITION:
Different control module specification
TROUBLE SYMPTOM:
- ABS does not operate.
- VDC does not operate.
INSPECTION DETAILS - DIFFERENT VDC CONTROL MODULE SPECIFICATION
| Step | Check | Yes | No |
|---|---|---|---|
| 1. CHECK VDCCM&H/U SPECIFICATION. Check the identification mark of VDCCM&H/U. Identification mark of VDCCM&H/U Wagon model OUTBACK 3.0 R: G5 Sedan model OUTBACK 3.0 R: GB |
Is the identification mark of VDCCM&H/U the same as vehicle specification? | Go to step 2 . | Replace the VDCCM&H/U. < Ref. to VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM/U) . > |
| 2. CHECK TCM SPECIFICATION. Check the TCM specification. |
Is the specification of TCM same as vehicle specification? | Go to step 3 . | Replace the TCM. < Ref. to TRANSMISSION CONTROL MODULE (TCM) .> < Ref. to TRANSMISSION CONTROL MODULE (TCM) . > |
3. CHECK AT SYSTEM.
|
Is DTC of AT system displayed? | Repair the AT system. | Go to step 4 . |
| 4. CHECK ECM SPECIFICATION. Check the ECM specification. |
Is the specification of ECM same as vehicle specification? | Go to step 5 . | Replace the ECM. < Ref. to ENGINE CONTROL MODULE (ECM) , for (H4SO) model, ENGINE CONTROL MODULE (ECM) , for (H4DOTC) model & ENGINE CONTROL MODULE (ECM) , for (H6DO) model. |
5. CHECK VDCCM&H/U.
|
Is the same DTC displayed? | Replace the VDCCM&H/U. | Go to step 6 . |
| 6. CHECK OTHER DTC DETECTION. | Is any other DTC displayed? | Perform the diagnosis according to DTC. | It results from a temporary noise interference. |