LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2005 >> Outback XT, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Security And Locks) >> Ignition Key Lock >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Key Lock: Inspection

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel lower cover.
  2. Remove the lower column cover.
  3. Unfasten the hold-down clip which secures the harness and disconnect the connector of the ignition switch from the body harness.
  4. Turn the ignition key plate to each position and check the continuity between the terminals of the ignition connector.
    IGNITION KEY TERMINALS

    Switch position Terminal No. Standard
    LOCK - -
    ACC No. 1 and No. 2 Less than 1 Ω
    ON No. 1 and No. 2
    No. 1 and No. 4
    No. 2 and No. 4    		 Less than 1 Ω
    ST No. 1 and No. 3
    No. 1 and No. 4
    No. 3 and No. 4    		 Less than 1 Ω

    If continuity dose not exist, replace the ignition switch.

scientia non olet · About LEMON Manuals