LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2005 >> Outback XT, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Security And Locks) >> Keyless Entry Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Entry Control Module: Removal

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect ground cable from battery.
  2. Remove glove box. < Ref. to REMOVAL . >
  3. Remove nut, then remove keyless entry control module (B) and the other electrical control module (A) while disconnecting connector.
    Fig 1: Removing Keyless Entry Control Module And Electrical Control Module
    G03752505Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect keyless entry control module and the other control module.
scientia non olet · About LEMON Manuals