VDC Control Module and Hydraulic Control Unit (VDCCM/U): Installation
- Install the VDCCM&H/U bracket.
Tightening torque: 33 N.m (3.3 kgf-m, 24 ft-lb)
- Install the VDCCM&H/U to bracket.
- Install the clip.
NOTE: Hook the clip on the pawl of bracket securely.
- Connect the brake pipes to their specified VDCCM&H/U positions.
Tightening torque:
< Ref. to FRONT BRAKE PIPES AND HOSE , COMPONENT, General Description.>
- Connect the connector to VDCCM&H/U.NOTE:
- Be sure to remove all foreign matters from inside the connector before connecting.
- Ensure that the VDCCM&H/U connector is securely locked.
- Connect the pressure sensor connector.
- Bleed air from the brake system.