LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2005 >> Outback i, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Security And Locks >> Security System >> Inspection >> Check Security System Condition Memory
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Security System Condition Memory

  1. Remove the key from ignition switch.
  2. Close all the doors, trunk lid and rear gate.
  3. Open the hood.
  4. Press the LOCK button of transmitter, and then wait until the security indicator light flashes twice for 0.5 sec at intervals of 2 seconds.
  5. Disconnect the ground cable from battery.
  6. Connect the battery ground cable to battery.
  7. Check that the security indicator light blinks twice within 0.5 seconds in 2 seconds cycle. When it does not blink, replace the body integrated unit.
scientia non olet · About LEMON Manuals