Cruise Control Command Switch: Removal
CAUTION:
Before servicing, be sure to read the notes in the AIRBAG SYSTEM
article
for proper handling of the driver's airbag module. < Ref. to
CAUTION
, General Description . >
- Set the front wheels in straight ahead position.
- Turn the ignition switch to OFF.
- Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
- Using TORX® BIT T30 (1), loosen two TORX® bolts which secure the driver's airbag module.
- Disconnect the airbag module connector on back of the airbag module.
- Remove the steering wheel. < Ref. to REMOVAL , Steering Wheel. >
- Remove the four screws to remove the lower cover from steering wheel.
- Remove one screw to remove the cruise control command switch from lower cover.