How To Use SUBARU Select Monitor

Prepare the Subaru Select Monitor kit. < Refer to PREPARATION TOOL , GENERAL DESCRIPTION. >

Fig 1: Identifying Subaru Select Monitor Kit
Courtesy of SUBARU OF AMERICA, INC.
Connect the diagnosis cable to Subaru Select Monitor.
Insert the cartridge to Subaru Select Monitor. < Refer to PREPARATION TOOL , GENERAL DESCRIPTION. >

Fig 2: Inserting Cartridge Into Subaru Select Monitor
Courtesy of SUBARU OF AMERICA, INC.
Connect the Subaru Select Monitor to the data link connector at the lower portion of instrument panel (on the driver's side).

Fig 3: Locating Data Link Connector
Courtesy of SUBARU OF AMERICA, INC.

CAUTION: Do not connect any scan tools except Subaru Select Monitor or general scan tool.
Turn the ignition switch to ON (engine OFF) and Subaru Select Monitor switch to ON.

Fig 4: Identifying Power Switch
Courtesy of SUBARU OF AMERICA, INC.
Using the Subaru Select Monitor, call up DTCs and data, then record them.