Compulsory Valve Operation Check Mode: Operation

Prepare the Subaru Select Monitor kit. < Refer to PREPARATION TOOL , GENERAL DESCRIPTION. >

Fig 1: Identifying Subaru Select Monitor Kit
Courtesy of SUBARU OF AMERICA, INC.
Connect the diagnosis cable to Subaru Select Monitor.
Insert the cartridge to Subaru Select Monitor. < Refer to PREPARATION TOOL , GENERAL DESCRIPTION. >

Fig 2: Inserting Cartridge Into Subaru Select Monitor
Courtesy of SUBARU OF AMERICA, INC.
Connect the test mode connector (A) located under the glove box.

Fig 3: Connecting Test Mode Connector Under Glove Box
Courtesy of SUBARU OF AMERICA, INC.
Connect the Subaru Select Monitor to the data link connector at the lower portion of instrument panel (on the driver's side).

Fig 4: Locating Data Link Connector
Courtesy of SUBARU OF AMERICA, INC.

CAUTION: Do not connect any scan tools except Subaru Select Monitor or general scan tool.
Turn the ignition switch to ON (engine OFF) and Subaru Select Monitor switch to ON.

Fig 5: Identifying Power Switch
Courtesy of SUBARU OF AMERICA, INC.
On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
On the «System Selection Menu» display screen, select the {Engine} and press the [YES] key.
Press the [YES] key after the information of engine type has been displayed.
On the «Engine Diagnosis» display screen, select the {System Operation Check Mode} and press the [YES] key.
On the «System Operation Check Mode» display screen, select the {Actuator ON/OFF Operation} and press the [YES] key.
Select the desired compulsory actuator on the «Actuator ON/OFF Operation» display screen and press the [YES] key.
Pressing the [NO] key completes the compulsory valve operation check mode. The display will then return to the «Actuator ON/OFF Operation» screen.

A list of the support data is shown in the following table.

DESCRIPTION REFERENCE

Description	Display
Compulsory fuel pump relay operation check	Fuel Pump
Compulsory radiator fan relay operation check	Radiator Fan Relay
Compulsory air conditioning relay operation check	A/C Compressor Relay
Compulsory purge control solenoid valve operation check	CPC Solenoid
Compulsory drain valve operation check	Vent Control Solenoid

NOTE:

The following parts will be displayed but not functional.

DESCRIPTION REFERENCE

Display
EGR Solenoid
ASV Solenoid
FICD Solenoid
Pressure Switching Solenoid 1
Pressure Switching Solenoid 2
Wastegate Control Solenoid
AAI Solenoid
Exhaust Bypass Valve Control Permit Flag
PCV Solenoid
Fuel tank sensor control valve

For detailed operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".