SUBARU Select Monitor

After clearing the memory, check for any remaining unresolved trouble data. < Refer to CLEAR MEMORY MODE . >
Idle the engine.
Prepare the Subaru Select Monitor kit. < Refer to PREPARATION TOOL , GENERAL DESCRIPTION. >

Fig 1: Identifying Subaru Select Monitor Kit
Courtesy of SUBARU OF AMERICA, INC.
Connect the diagnosis cable to Subaru Select Monitor.
Insert the cartridge to Subaru Select Monitor. < Refer to PREPARATION TOOL , GENERAL DESCRIPTION. >

Fig 2: Inserting Cartridge Into Subaru Select Monitor
Courtesy of SUBARU OF AMERICA, INC.
Connect the test mode connector (A) located under the glove box.

Fig 3: Connecting Test Mode Connector Under Glove Box
Courtesy of SUBARU OF AMERICA, INC.
Connect the Subaru Select Monitor to the data link connector at the lower portion of instrument panel (on the driver's side).

Fig 4: Locating Data Link Connector
Courtesy of SUBARU OF AMERICA, INC.

CAUTION: Do not connect any scan tools except Subaru Select Monitor or general scan tool.
Turn the ignition switch to ON (engine OFF) and Subaru Select Monitor switch to ON.

Fig 5: Identifying Power Switch
Courtesy of SUBARU OF AMERICA, INC.
On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
On the «System Selection Menu» display screen, select the {Engine} and press the [YES] key.
Press the [YES] key after the information of engine type has been displayed.
On the «Engine Diagnosis» display screen, select the {D Check} and press the [YES] key.
When the "Perform D Check?" is shown on the screen, press the [YES] key.
Perform subsequent procedures as instructed on the display screen.

If trouble still remains in the memory, the corresponding DTC appears on the display screen.

NOTE:

For detailed operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".
For details concerning DTC, refer to "LIST OF DIAGNOSTIC TROUBLE CODE (DTC) ".
Release the parking brake.
The speed difference between front and rear wheels may light the ABS warning light, but this indicates no malfunctions. When engine control diagnosis is finished, perform the ABS memory clearance procedure of self-diagnosis function.