Electrical Specification

Fig 1: Identifying AT Shift Lock Connector Terminal

Courtesy of SUBARU OF AMERICA, INC.

INPUT OUTPUT SIGNAL SPECIFICATIONS

Contents	To Connector No.	Terminal No.	Input/Output signal
Contents	To Connector No.	Terminal No.	Measured value and measuring conditions
Battery power supply	B281	2	9 - 16 V
Ignition power supply	B280	19	10 - 15 V when ignition switch is at ON or START.
ACC power supply	B280	10	10 - 15 V when ignition switch is at ACC or ON.
Inhibitor Switch ("P" position)	B280	5	0 V when select lever is in "P" position. 9 - 16 V when select lever is in other positions than "P" position.
Stop light switch	B280	9	9 - 16 V when stop light switch is ON. 0 V when stop light switch is OFF.
"P" position switch	B280	6	0 V when select lever is in "P" position. 9 - 16 V when select lever is in other positions than "P" position.
Shift lock solenoid signal	B281	9	8.5 - 16 V when shift lock is released. 0 V when shift lock is operating.
Key warning switch signal	B280	20	9 - 16 V when key is inserted. 0 V when key is removed.
Key lock solenoid signal	B281	3	Pulse is output when switching key lock between locked and unlocked. 0 V at other conditions than above.
Ground	B281	4	-
Ground	B281	13	-