LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Forester X, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H4SO) >> Fuel Sub Level Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Sub Level Sensor: Removal

WARNING:
  • Place "NO FIRE" signs near the working area.
  • Be careful not to spill fuel on the floor.
  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Battery Ground Cable
    G04988132
  2. Lift-up the vehicle.
  3. Drain fuel from fuel tank.

    <Ref. to DRAINING FUEL , PROCEDURE, FUEL. >

  4. Remove the luggage floor mat. <Ref. to REMOVAL , Luggage Floor Mat. >
  5. Remove the service hole cover.
    Fig 2: Identifying Service Hole Cover
    G04997480
  6. Disconnect the connector from fuel sub level sensor.
  7. Disconnect the fuel jet pump hose.
    Fig 3: Identifying Fuel Sub Level Sensor Connector
    G04997481
  8. Remove the bolts which install fuel sub level sensor on fuel tank.
    Fig 4: Identifying Fuel Sub Level Sensor Bolt
    G04997482
  9. Remove the fuel sub level sensor.
    Fig 5: Removing Fuel Sub Level Sensor
    G04997483