LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Forester X, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4SO) >> Clear Memory Mode >> Operation >> SUBARU Select Monitor (OBD Mode)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

SUBARU Select Monitor (OBD Mode)

  1. On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after the information of engine type has been displayed.
  4. On the «Engine Diagnosis» display screen, select the {OBD System} and press the [YES] key.
  5. On the «OBD Menu» display screen, select {DTC Clear} and press the [YES] key.
  6. When the "Clear Diagnostic Code?" is shown on the screen, press the [YES] key.
  7. Turn the Subaru Select Monitor and ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the "EXTXREF SUBARU SELECT MONITOR OPERATION MANUAL".
scientia non olet · About LEMON Manuals