LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Forester X, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4SO) >> Subaru Select Monitor >> Operation >> How To Use SUBARU Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

How To Use SUBARU Select Monitor

  1. Prepare the Subaru Select Monitor kit. <Ref. to PREPARATION TOOL  GENERAL DESCRIPTION. >
    Fig 1: Identifying Subaru Select Monitor Kit
    G04998013
  2. Connect the diagnosis cable to Subaru Select Monitor.
  3. Insert the cartridge to Subaru Select Monitor. <Ref. to PREPARATION TOOL  GENERAL DESCRIPTION. >
    Fig 2: Inserting Cartridge Into Subaru Select Monitor
    G04998014
  4. Connect the Subaru Select Monitor to data link connector.
    1. Data link connector is located in the lower portion of instrument panel (on the driver's side).
      Fig 3: Locating Data Link Connector
      G04997584
    2. Connect the diagnosis cable to data link connector.
    CAUTION: Do not connect scan tools except for Subaru Select Monitor and general scan tool.
  5. Turn the ignition switch to ON (engine OFF) and Subaru Select Monitor switch to ON.
    Fig 4: Identifying Power Switch
    G04993018
  6. Using the Subaru Select Monitor, call up DTCs and various data, then record them.
scientia non olet · About LEMON Manuals