Clear Memory Mode
Clear the DTC stored in the occupant detection system module after repairing occupant detection system.
NOTE:
After the breakdown is recovered, the breakdown code for completed recoveries are read out when the next breakdown occurs if the memory clear work is not performed.
- Select the {Occupant Detection System} on the main menu, and press the [YES] key.
- On the «Occupant Detection System» display screen, select {Clear Memory} and press the [YES] key.
- When the {Done} is shown on the display, DTCs will be cleared.
NOTE:
When the {Cannot erase the DTC stored, perform the diagnosis according to trouble symptom} is shown, read the DTC and perform the diagnosis according to DTC. <Ref. to
DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC) . >