Sensor Data Read

Read the load cell sensor data when checking the list or analyzing the problem.

1. On the «Occupant Detection System» main menu screen, select the {Sensor Data Output} and press the [YES] key.
   NOTE: Do not touch the vehicle for approximately 20 seconds after pressing the [YES] key. Output value may be changed when sensing the pitching and vibration of the vehicle while reading sensor data output.
2. When the sensor output value is displayed in the [*****], press the [YES] key to move to the main menu.
   Fig 1: Identifying Screen Display - Sensor Output Value

   Courtesy of SUBARU OF AMERICA, INC.