Data Link Connector: Note

This connector is used for the general scan tool and the Subaru Select Monitor.

CAUTION: Do not connect any scan tools other than the general scan tool and Subaru Select Monitor, as the Subaru Select Monitor circuit may become damaged.

Fig 1: Identifying Data Link Connector

Courtesy of SUBARU OF AMERICA, INC.

DATA LINK CONNECTOR SPECIFICATION

Terminal No.	Content	Terminal No.	Content
1	Power supply	9	Empty
2	Empty	10	Subaru select monitor/General scan tool signal
3	Empty	11	Empty
4	Empty	12	Ground
5	Empty	13	Ground
6	Empty	14	Empty
7	Empty	15	Empty
8	Empty	16	Empty